Liquid Glider as top coat to fine tune race waxing. Rex NF-series gliders have been used as a final top coating layer in many World Cup races this season. With this application method that uses short curing time and Rex Merino Roller, they improve glide even when applied on top of powders!
Waxing Tips
When waxing skis, ensure adequate ventilation and prevent solvent fumes, gases produced during wax melting, and dust generated during brushing from entering the respiratory tract. These instructions apply equally to both fluorine-free N-Kinetic products and Future Fluor products containing fluorinated compounds. Common: Ensure good ventilation in the waxing area.Protect your clothing with the convenient Rex […]
Waxing Tips
Preparing skis for training and race-ready isn’t rocket science. Here are some slick waxing tips using Rex’s top-quality and easy-to-use products. Start with these Always clean the glide surfaces first with Glide Cleaner, as the adhesion and durability of glide waxes will improve significantly. For training glides and as a base wax for race waxing […]
Waxing Tips
How to succeed in grip waxing? Check out the tutorial videos. Peeling the wax can Grip wax: normal freezing weather conditions Grip wax: New, compressed and moist snow Grip Wax: artificial snow, cold/freezing conditions Grip wax: moist artificial snow, icy tracks Liquid Rex Grip Waxes Grip waxing with Rex liquid grips is simple. Choose the […]
Waxing Tips
The Rex liquid gliders are comparable to solid hot waxes in terms of performance. Only the application method is different. Using liquid gliders does not require wax iron. Liquid sponge waxes Clean the glide surfaces with Glide Cleaner before each waxing. Liquid spray waxes Clean the glide surfaces with Glide Cleaner before each waxing.
Video
+10..-0°C Wet snow -2..-8°C new snow -1..-10°C old/mixed snow -10..-15°C COld Long Distances: +5 -15°C old / mixed snow If moisture and more specific weather conditions are known, you can apply a suitable NFX powder on the surface long distances: +5 -15°C new snow If moisture and more specific weather conditions are known, you can […]
Video
Using solid waxes with a waxing iron might sound too complicated. But the reality is far from that. Rex hot waxes are easy to apply, and learning to use them is simple. Stages of hot waxing: Always clean the glide surfaces with Glide Cleaner before waxing. Recommended accessories: Recommended products: Choose your preferred fluor-free glide […]
Waxing Tips
Instructions on how to clean skis from fluor when making the switch to Rex fluor-free waxes. #1 Clean the skis with Ski Wax Remover. Apply Ski Wax Remover to a fiber cloth and wipe the base of the ski until it’s damp. Brush multiple times with a stainless steel brush to remove old waxes. Wipe […]
Blog Posts