ITEM NUMBER: 115
Blue
-2…-8°C
The king of grip waxes! Widely used as a universal grip wax on cold temperatures. Its grip and glide properties can be adjusted by the thickness of the wax layer. The colder the weather the thinner the layer.
Using grip wax using from start to finish – base preparation and glide waxing
- Tape off the grip zone.
- Roughen the grip zone with sandpaper and clean off the sanding dust.
- Apply a layer of Rex base wax. (You can also use liquid Rex Base Wax, which is a faster method.)
- Heat the base wax with a heat gun or waxing iron.
- Smooth it with a cork.
- Apply a thin layer of Rex grip wax according to the conditions.
- Smooth it with a cork.
- Repeat the application of grip wax 2-4 times, smoothing the wax after each layer. Apply thinner wax to both ends of the grip zone and thicker wax in the middle.
- Typically, you will need 2-4 layers of wax. The required amount depends on the stiffness of the ski and personal preferences. You can add wax even on the track.
Peeling the wax tin
-
TK-2251 Service Line Klister
+10…0°C
A special klister for wet and coarse snow.
#2251
-
Red
+1…-1°C
Punainen pitovoide nollakeleille.
#131
-
Red Liquid Klister
+10…0°C
Helppoa liistein levitystä ilman sormien sotkemista.
#2101
-
Red Special Klister
+10°…0°C
For wet snow, falling snow and wet conditions.
#210
-
Base Wax
Pitävä ja kestävä pohjustusvoide kaikkien pitovoiteiden alle. Soveltuu nyt myös korotuskerrosten tekoon.
#190
-
Tape Grip Universal
+5…-20°C
Markkinoiden paras pitoteippi!
#93
-
N41 Pink Old Snow
-2...-15°C
Dual Compound -pitovoide vanhalle / karkealle ja tykkilumelle. Koostumukseltaan liisterinomainen.
#101
-
N31 Green
-8...-20°C
A hard kick wax for cold conditions.
#111
-
N21G Black New Snow
-1...-12°C
Blue condition kick wax for especially dry new snow.
#143
-
N21 Blue
-2...-8°C
Blue wax for mid-frost conditions.
#121