ITEM NUMBER: 190
Base Wax
Very sticky and durable base wax under any grip wax. New and upgraded formula makes it easier to apply and is also suitable for adding mid-layers.
Using grip wax using from start to finish – base preparation and glide waxing
- Tape off the grip zone.
- Roughen the grip zone with sandpaper and clean off the sanding dust.
- Apply a layer of Rex base wax. (You can also use liquid Rex Base Wax, which is a faster method.)
- Heat the base wax with a heat gun or waxing iron.
- Smooth it with a cork.
- Apply a thin layer of Rex grip wax according to the conditions.
- Smooth it with a cork.
- Repeat the application of grip wax 2-4 times, smoothing the wax after each layer. Apply thinner wax to both ends of the grip zone and thicker wax in the middle.
- Typically, you will need 2-4 layers of wax. The required amount depends on the stiffness of the ski and personal preferences. You can add wax even on the track.
Peeling the wax tin
-
TK-2251 Service Line Klister
+10…0°C
A special klister for wet and coarse snow.
#2251
-
Red
+1…-1°C
Punainen pitovoide nollakeleille.
#131
-
Red Liquid Klister
+10…0°C
Helppoa liistein levitystä ilman sormien sotkemista.
#2101
-
Red Special Klister
+10°…0°C
Punainen Special liisteri on kehitetty kultaliisterin pohjalta yhteistyössä Suomen hiihtomaajoukkueen kanssa.
#210
-
Tape Grip Universal
+5…-20°C
Markkinoiden paras pitoteippi!
#93
-
N41 Pink Old Snow
-2...-15°C
Dual Compound -pitovoide vanhalle / karkealle ja tykkilumelle. Koostumukseltaan liisterinomainen.
#101
-
N31 Green
-8...-20°C
A hard kick wax for cold conditions.
#111
-
N21G Black New Snow
-1...-12°C
Blue condition kick wax for especially dry new snow.
#143
-
N21 Blue
-2...-8°C
Blue wax for mid-frost conditions.
#121
-
N11 Yellow
+2...-2°C
A versatile soft kick wax for both plus and mi- nus degrees.
#136