Brushes, scrapers and other accessories

In addition to a complete wax line, Rex offers a variety of waxing tools and accessories to ensure a pleasurable waxing experience. Proper tools and accessories help you to get your skis fast, easily and enjoyably.


Waxing brushes

3

618
Nylon brush

A basic accessory for every skier. Always finish hot waxing by brushing with a clean nylon brush. Used also for finishing fluorinated coatings. (Keep a dedicated brush that you use only for fluorinated coatings.)

3

619
Horsehair brush

Used for opening up the base strucure after scraping off most hot wax, before finishing with a nylon brush. Like brass brush, horsehair brush is also more abrasive than a nylon brush.

3

620
Brass brush

After scraping off hard waxes like black or green, start the brushing phase by opening up the base structure with a few gentle strokes from tip to tail. Suitable also for cleansing the ski base together with Rex Remover or on its own.

3

621
Steel brush

The most abrasive of all Rex brushes. For opening up the base structure after scraping, or cleansing the base. Don't press too hard!

1

617
Brass/Nylon brush

If having two separate brushes is too much for you, we also have this special 2-in-1 brush!

3

640
Nylon roto brush
 

3

641
Soft nylon roto brush
 

3

642
Horsehair brush
 


Scrapers, corks

1

604
Acrylic scraper

A must-have for every skier. Various graphics.

1

607
Groove scraper

A handy tool for scraping just the groove with one quick motion.

3

602
Multiscraper

Acrylic scraper with a special shape.

3

600
Plastic/metallic scraper

An old-school triangle scraper with a metallic edge.

3

611
Natural cork

For smoothening grip waxes. Also suitable for applying fluorinated coatings like fluoro blocks. If you use a cork to apply fluorinated coatings, use a dedicated cork that is clean.

1

612
Synthetic cork

For smoothening grip waxes

3

625
Fiberrex

For cleansing the ski base together with Rex Remover, or for removing fluff from ski base.

1

627
Rexlon teflon cloth

Size 8x20 cm. Used for ironing fluorinated coatings. Prevents base burning and keeps the iron clean.