Rex Racing Service Line – The latest racing waxes straight from World Cup waxing cabin

Previously available for professional waxers and ski teams only, Rex is now releasing a limited series of Racing Service Line products through selected shops.

Racing Service Line consists of selected and exclusive pre-release products from our product development cycle, developed together with top ski teams.

Racing Service HF Spray Gliders

Rex HF Gliders in liquid form: The wax is 100% the same – only the application method is different.

Recent advancements in solvent chemistry and R&D have resulted in the creation of totally uncompromised liquid versions of our latest HF series gliders. The new Rex HF Spray Glider series continues with the liquid approach we first introduced with our Liquid Klisters, meaning that the wax itself is the same, but only the application method is different.

  • Uncompromised liquid versions of our HF Gliders, suitable for World Cup racing use.
  • Now you can apply genuine Rex HF glider very quickly, without using a waxing iron and scraper. Less mess and faster preparation of skis.
  • Durability is very good because the wax recipe is the same as in block versions of Rex HF Gliders.
  • With a single can you get as many waxing as with our regular HF block. (Approximately 6 pairs of skating skis or 10 pairs of classic skis)
  • In glide tests the spray version has been even faster than the block version. (30 km endurance test, spray version was faster during the whole test)
3

4613
HF11 Spray
+2…-2°C

FLUOR_x3.png

For new and old snow. The softest wax on HF -series. Compared to traditional warm condition HF gliders the HF11 is relatively hard and not so oily wax. Extremely dirt repellent.

Available autumn 2018

3

4623
HF21 Spray
-2…-8°C

FLUOR_x3.png

For all snow types. Developed for mild to medium frosts, the HF21 is our all time fastest HF glider! Developed especially as an underlayer for fluoro powders, but works extremely well also as a final layer.

Available now!

3

4643
HF21 G Spray
+2…-12°C

Engineered especially for new snow and contains a precisely defined amount of graphite. Hardness is positioned between HF11 Yellow and HF21 Blue.

Available autumn 2018


Rex HF Spray Gliders explained


Racing Service Fluor Powders

Limited edition fluor powders straight from the World Cup waxing cabin. New powders 77 & 83 launched March 2017!

3

4983
"77" Fluor Powder
+1…-7°C

FLUOR_x4.png

New / mixed snow

“77” is the powder of choice for new snow. It has quickly became one of the best-selling powders from Rex! A constant powder test winner when the snow is new and relatively dry. “77” was a result of intensive powder R&D prior to Lahti 2017 World Championships. Made of completely new raw materials. Does not contain graphite or molybdene.

Application:

  • Iron temperature: 180°C
  • Melt with several quick wipes until the powder appears dark.
  • Brush the powder up with a nylon brush
  • Melt again with several quick wipes
  • Let cool down
  • Scrape lightly and brush well
3

4983
"83" Fluor Powder"
-2…-12°C

FLUOR_x4.png

Old snow / mixed snow / artificial snow

A sibling to “77”, the “83” is at its best when new snow begins to transform into older snow. A result of intensive powder R&D prior to Lahti 2017 World Championships, where it dominated during the cold days of the games. Completely new raw materials. Contains graphite.

Application:

  • Iron temperature: 180°C
  • Melt with several quick wipes until the powder appears dark.
  • Brush the powder up with a nylon brush
  • Melt again with several quick wipes
  • Let cool down
  • Scrape lightly and brush well
3

4981
"342" Fluor Powder
+10°…-20°C

FLUOR_x4.png

Moist and coarse snow, warm and wet snow.

Special powder for moist and coarse snow. Delivers in a wide temperature range, when moist snow.

Melting point: 150°C

Applying method:

  • Iron temperature >180°C
  • Melt powder with hot iron
  • let the ski cool down
  • scrape and brush well

Warm and wet snow:

  • Iron temperature >180°C
  • Melt powder with hot iron
  • brush up the powder
  • melt the powder second time
  • let the ski cool down
  • scrape off excess wax and brush well
3

4982
"63" Fluor Powder
-5…-20°C

FLUOR_x4.png

For all snow types.

Fluoro powder from cold conditions to mid-frost. Contains graphite.

Melting point: 130°C

Applying method:

  • Iron temperature: >160°C
  • Melt the powder with hot iron
  • brush up
  • melt with several quick wipes. Until powder turns dark
  • let the ski cool down
  • scrape off excess wax and brush well
3

477
Grip Powder
 

Developed for coating grip waxes. Extremely fine grain polymer wax. Reduces the kinetic friction of grip waxes and prevents icing. Suitable for klister and kick wax coating.

  • Sprinkle on top of grip wax or klister
  • Spread lightly with finger

Racing Service Grip Waxes

Grip waxes with our latest innovations.

3

184
TK-1814
-2…-15°C

FLUOR_x2.png
  • Artificial snow
  • old and moist snow
  • hard tracks

TK-1814 is a new kind of grip wax designed for the conditions that are usual in the world cup during the early season. When the snow has been brought from faraway mountains and spread with a bulldozer, this is the wax of the day.

More info about TK-1814

3

31
30G
+1…-8°C

FLUOR_x2.png
  • New snow

A new fluorinated grip wax for new snow.

Use as the final grip wax layer on top of harder grip waxes (e.g. blue) when it's snowing.

Around 0°C good on its own or combined with klister.